1 *, and Sh r yaxshiboyev


Download 286.89 Kb.
bet2/4
Sana22.04.2023
Hajmi286.89 Kb.
#1379441
1   2   3   4
Bog'liq
ING. Макола Мен ва Шерзод Я

3. Results and Discussions
The results of the calculations are shown in Figures 2-5 as the dependences of the lowest frequency on the wave number .






Fig.2. According to  from k at and various . The materials of the supporting layers are steel, and the filler is polymer.




Fig.3.According to from k at and various .The materials of the supporting layers are aluminum, and the filler is polymer.









Fig.4.According to from k at and various . The materials of the supporting layers are aluminum, and the filler is fiberglass.




Fig.5.According tofrom k at ; .
The materials of the bearing layers - steel, filling –
different (polymer, fiberglass, wood plastic, tantalite).



4. Conclusions:
-the theory of non-stationary transverse vibrations of an elastic three-layer kin-plate is developed based on general solutions in transformations of equations of the theory of elasticity, in a flat setting;
- the developed theory allows us to calculate all the components of the displacement vector and the stress tensor in the sections of the plate as a whole and of all layers through the introduced main parts of the intermediate surface of the middle layer;
- the obtained general equations of vibration make it possible to obtain refined equations of the Tymoshenko type and approximate equations of the Kirchhoff type, which can be applied to solve applied problems of engineering practice;
- from a comparative analysis of the obtained numerical results it follows that the vibration equations and formulas for determining the SSS developed in the work allow a high degree of reliability to determine the frequencies of antisymmetric vibrations of three-layer plates. Moreover, the frequency analysis performed on the basis of the presented model requires minimal computational resources;
- regardless of the thickness of the middle layer, the dependence of the frequency on the wave number is directly proportional. For a fixed value of the wave number, an increase in the thickness of the middle layer of the plate leads to an increase in the vibration frequency, which strongly depends on the filler material. A plate with a filler with large values of the elastic modulus and density has a lower oscillation frequency than with a filler with lower values of the modulus and density.



Download 286.89 Kb.

Do'stlaringiz bilan baham:
1   2   3   4




Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2024
ma'muriyatiga murojaat qiling