C h a p t e r 12-1 Catalyst 2960 Switch Software Configuration Guide ol-8603-04 12

•
“VMPS Configuration Guidelines” section on page 12-25
•
“Configuring the VMPS Client” section on page 12-25
•
“Monitoring the VMPS” section on page 12-28
•
“Troubleshooting Dynamic-Access Port VLAN Membership” section on page 12-29
•
“VMPS Configuration Example” section on page 12-29
Step 4
exit
Return to global configuration mode.
Step 5
Repeat Steps 2 through 4 on a second interface in Switch A.
Step 6
end
Return to privileged EXEC mode.
Step 7
show running-config
Verify your entries. In the display, make sure that the interfaces are 
configured as trunk ports.
Step 8
show vlan
When the trunk links come up, Switch A receives the VTP information 
from the other switches. Verify that Switch A has learned the VLAN 
configuration.
Step 9
configure terminal
Enter global configuration mode.
Step 10
interface gigabitethernet0/1
Define the interface on which to set the STP cost, and enter interface 
configuration mode.
Step 11
spanning-tree vlan 2-4 cost 30
Set the spanning-tree path cost to 30 for VLANs 2 through 4.
Step 12
end
Return to global configuration mode.
Step 13
Repeat Steps 9 through 12 on the other configured trunk interface on 
Switch A, and set the spanning-tree path cost to 30 for VLANs 8, 9, and 
10.
Step 14
exit
Return to privileged EXEC mode.
Step 15
show running-config
Verify your entries. In the display, verify that the path costs are set 
correctly for both trunk interfaces.
Step 16
copy running-config startup-config
(Optional) Save your entries in the configuration file.