Computer Network Unit 1 q what are the topologies in computer n/w ?


Q 4. What is the maximum rate of channel for noiseless 3 Khz binary channel?


Download 392.71 Kb.
bet2/57
Sana09.06.2023
Hajmi392.71 Kb.
#1474191
1   2   3   4   5   6   7   8   9   ...   57
Bog'liq
Computer Network

Q 4. What is the maximum rate of channel for noiseless 3 Khz binary channel?
Ans:The Nyquist Limit can be disregarded as this is not a noiseless thus we use Shannon's result which says the maximum data rate of a noisy channel is X=Hlog2 (1+S/N) bps using 10Log10 S/N as our standard quality 2=Log10 S/N-->S/N=102 --> S/N=100X=3000Log2 (1+100)bps which gives X= 19,974.63 bps.
Q 5. Why network standardization is done ?
Ans: Computer networking is a great way of connecting the computers and sharing data with each other. There are many vendors that produce different hardware devices and software applications and without coordination among them there can be chaos, unmanaged communication and disturbance can be faced by the users. There should be some rules and regulations that all the vendors should adopt and produce the devices based on those communication standards. 
Q 6. Explain OSI reference model with functions of each layer ?
Ans: The Open Systems Interconnect (OSI) model has seven layers. This article describes and explains them, beginning with the 'lowest' in the hierarchy (the physical) and proceeding to the 'highest' (the application). The layers are stacked this way:

  • Application

  • Presentation

  • Session

  • Transport

  • Network

  • Data Link

  • Physical

PHYSICAL LAYER


The physical layer, the lowest layer of the OSI model, is concerned with the transmission and reception of the unstructured raw bit stream over a physical medium. It describes the electrical/optical, mechanical, and functional interfaces to the physical medium, and carries the signals for all of the higher layers. It provides:

  • Data encoding: modifies the simple digital signal pattern (1s and 0s) used by the PC to better accommodate the characteristics of the physical medium, and to aid in bit and frame synchronization. It determines:

    • What signal state represents a binary 1

    • How the receiving station knows when a "bit-time" starts

    • How the receiving station delimits a frame

  • Physical medium attachment, accommodating various possibilities in the medium:

    • Will an external transceiver (MAU) be used to connect to the medium?

    • How many pins do the connectors have and what is each pin used for?

  • Transmission technique: determines whether the encoded bits will be transmitted by baseband (digital) or broadband (analog) signaling.

  • Physical medium transmission: transmits bits as electrical or optical signals appropriate for the physical medium, and determines:

Download 392.71 Kb.

Do'stlaringiz bilan baham:
1   2   3   4   5   6   7   8   9   ...   57




Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2024
ma'muriyatiga murojaat qiling