Ferrous Materials and Non-Ferrous Metals and Alloys 1 introduction


Download 303.37 Kb.
Pdf ko'rish
bet41/43
Sana22.12.2021
Hajmi303.37 Kb.
#182307
1   ...   35   36   37   38   39   40   41   42   43
Bog'liq
150 Sample-Chapter

(4) Inconel and incolony:

 These alloys principally contain, Ni, Cr, Fe, Mo, Ti and very

small proportions of carbon. These are used as high temperature alloys. Inconel does

not respond to heat treatment.

2.12.5 Bearing Materials

A bearing material should possess the following characteristics:

(1) It should possess enough compressive strength to provide adequate load carrying

capacity.

(2) It should possess good plasticity to negate small variations in alignment and

fitting.

(3) Its wear resistance should be adequate to maintain a specified fit.

(4) The coefficient of friction of the bearing material should be low to avoid excessive

heating.

Some significant bearing metals are as follows:


Download 303.37 Kb.

Do'stlaringiz bilan baham:
1   ...   35   36   37   38   39   40   41   42   43




Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2024
ma'muriyatiga murojaat qiling