Fractional laser system
) Installation of guide light arm
Download 81.25 Kb. Pdf ko'rish
|
CO2 fractional Vaginal tightenning laser user\'s manual
- Bu sahifa navigatsiya:
- Attention: guide light arm only can move to the arrow direction.
- 4) Installation of the scan head
- 6) change water Put “add water” and ”run off water” connect, ventage plug connect run off water, then add water again. 7.3. Direction for use and Operating procedure
- 7.4 Screen Instruction
|
3) Installation of guide light arm
Guide light system was made up of guide light arm and connection seat .connection seat has fixed into the top of the shell. After check the guide light arm, connect it to connection seat, then fix the screws firmly. Attention: guide light arm only can move to the arrow direction. Move B 180 degree according to C, then press A according to the Arrow. Then insert B to the hole on main unit, then screw D, fix the guide light arm firmly. 4) Installation of the scan head 1. Whirl the scan head to clockwise direction. 2. Installation of control wire on the scan head, insert the control wire, then fix the screws firmly. 5) Installation of power cord and foot switch 1. Insert the power cord to the connector on the back of the machine, then check if firmly. 2. Connect the foot switch, aim at the gap, whirl to the clockwise direction, check if firmly. 6) change water Put “add water” and ”run off water” connect, ventage plug connect run off water, then add water again. 7.3. Direction for use and Operating procedure 1) Turn on the power of device 2) Appear to be the main screen as below when key switch is ON. 3) Select a mode and range of adjustment when the main screen comes up. 4) Operate it by stepping FOOT SWITCH after completing every procedure. 5) Detail instructions of each mode are as follows 7.4 Screen Instruction It is used for facial treatment, such as facial rejuvenation, acne, shrinking pores, etc. It is used for cutting, such as the treatment of foreskin, hemorrhoids, cervical polyps, etc. It is generally not recommended for those without skilled operation experience. It is generally used for the treatment of the body, such as stretch marks, scars, etc. It is generally used for private treatment, such as the treatment of internal and external vulva. Press this button, enter the treatment interface, you can adjust every parameter. 1) Touch “LASER POWER “ box, then press” ” or “ ” ,the energy will increase or decrease. * Range of Adjustment: 1-30W. 2) Touch “ RESIDENCE” box, press “ ” or “ ” to adjust. * Range of Adjustment: 0.1-10.0ms 3) Touch “POINTS” box, press “ ” or” ” to adjust. * Range of Adjustment: 1-5000ms 4) Touch “ROW SPACING” box, press” ” or “ ” to adjust. * Range of Adjustment: 0.1mm ~ 2.6mm 5)Touch “SCAN MODE” box, press “ ” or “ ” to adjust. * Range of Adjustment: Midsplit, Sequence,Disorder. 6)Touch “SCAN TIMES” box, press “ ” or “ ” to adjust. * Range of Adjustment: 1-5th. 7)Touch ,you can change different shape,like Square, round, triangular, hexagonal, straight. 8) Touch “ “ or “ “,you can change the shape size , And preview if the size and shape is suitable when press “preview”. 9) After adjust suitable parameters, press “ ”,then press the foot switch,the machine will shoot laser beam, turn to Main screen when touch “BACK” box at the top right corner of screen. Download 81.25 Kb. Do'stlaringiz bilan baham: 
|