Iot configuration Setting Form Following parameters that you may need to reset

IoT Configuration Setting Form

Following parameters that you may need to reset:

• 
  Operator APN: internet.beeline.uz
  

• 
  Server IP and Port: ___67281.flespi.gw:25118____________________________
  

• 
  Bluetooth Name: king shering
  

(Bluetooth Format: <=9 byte, including ‘0-9’, ‘a-z’, and ‘A-Z’).

• 
  New Password: _________Okai______________________________________
  

(Password Format: 4-20 byte, including ‘0-9’, ‘a-z’, and ‘A-Z’).

• 
  Device Name (For display in each report): king shering
  

(Device Name Format: <=20, including ‘0-9’, ‘a-z’, ‘A-Z’, ‘_’ and ‘-‘)

• 
  The maximal speed: _____________25_________________________________
  

(Speed range: 0-30 km/h)

• 
  Unit of speed: _________________km/h________________________________
  

(Unit types: mph and km/h)

• 
  Interval of sending locking device report (sec): _________240_______________
  

(Interval Range: <=5, and from 5 to 86400 seconds. 240 is recommended).

• 
  Interval of sending unlocking device report (sec): _______10________________
  

(Interval Range: <=5, and from 5 to 86400 seconds. 10 is recommended).

• 
  Interval of sending emergency battery report (min): _________240___________
  

(Interval Range: <=4, and 0 or, from 1 to 1440 mins. 240 is recommended).
Notice: When the main battery is out of working, the device uses the emergency battery to send the regular report by which you can know where the scooter is now. In this case, setting the interval of send emergency battery report is vital importance for you to find your scooters.