Pcb glossary This glossary of terms covers common phrases in pcb manufacturing. Some of these topics are covered further in our free dfm guide. Active Components


NPTH: Non-plated trough-hole. A hole drilled through a circuit board which is not used for electrical connection and thus not copper plated. Pad


Download 21.36 Kb.
bet5/6
Sana19.06.2023
Hajmi21.36 Kb.
#1609600
1   2   3   4   5   6
Bog'liq
PCB Glossary

NPTH: Non-plated trough-hole. A hole drilled through a circuit board which is not used for electrical connection and thus not copper plated.
Pad: The portion of a conductive pattern for connection and attachment of electronic components on the PCB. Also called Land.
Passive Components: Simple electrical components which to do not vary the basic parameters of a circuit.
PCB: Printed Circuit Board. Also called Printed Wiring Board (PWB).
PEC: Printed Electronic Component.
Pick-and-Place: A manufacturing operation of the assembly process in which components are selected and placed onto specific locations according to the assembly file of the circuit.
Pitch: The center-to-center spacing between conductors, such as pads and pins, on a PCB.
Plastic Leaded Chip Carrier (PLCC): A component package with J-leads.
PTH (plated-through Hole): A plated hole used as a conducting interconnection between different layers or sides of a PCB either used as connection for through-hole component or as a via.
Plating Resist: Material deposited as a covering film on an area to prevent plating on this area.
Reflow Soldering: Melting, joining and solidification of two coated metal layers by application of heat to the surface and pre-deposited solder paste.
Resist: Coating material used to mask or to protect selected areas of a pattern from the action of an etchant, solder, or plating.
Route (or Track): A layout or wiring of an electrical connection.
RF (radio frequency) and wireless design: A circuit design that operates in a range of electromagnetic frequencies above the audio range and below visible light. All broadcast transmission, from AM radio to satellites, falls into this range, which is between 30KHz and 300GHz.
Screen Printing: A process for transferring an image from a patterned screen stencil to a substrate using a paste forced through by a squeegee of a screen printer.
Silk Screen (Silk Legend): Epoxy-ink Legend printed on PCB. The most common colors used are white and yellow. See Legend.

Download 21.36 Kb.

Do'stlaringiz bilan baham:
1   2   3   4   5   6




Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2024
ma'muriyatiga murojaat qiling