Power Plant Engineering

2.14.3 PROPERTIES OF BIO GAS
Main properties of bio gas are:
1. Comparatively simple and can be produced easily.
2. Burns without smoke and without leaving ash as residues.
3. Household wastes and bio-wastes can be disposed of usefully and in a healthy manner.
4. Reduces the use of wood and to a certain extent prevents deforestation.
5. The slurry from the biogas plant is excellent manure.
2.14.4 BIO GAS PLANT TECHNOLOGY
The important parts of biogas plant are
1. The tank where biomass undergoes decomposition (digester)
2. The tank where biomass is mixed with water (mixing tank)
3. The tank where slurry of biomass is collected (out flow tank)
4. Arrangement to store gas.
Due to the action of bacteria in the absence of oxygen, biogas is produced in the plant. This is
collected in the tank. In the gasholder type plant, the cylinder rises up as the gas fills the tank and the
storage capacity increases. The gas storage capacity of dome type will be less than that of gasholder
type. Residue of biomass (slurry) can be used as good manure.
Biogas plants are built in several sizes, small (0.5 m
3
/day) to very large 2500 m
3
/day). Accord-
ingly, the configurations are simpler to complex.
Biogas plants are classified into following main types.
—Continuous type or batch type.
—Drum type and dome type.
There are various configurations within these types.
CONTINUOUS TYPE
Continuous type biogas plant delivers the biogas con-tinuously and is fed with the biomass
regularly. Continuous type biogas plant is of two types.
(A) SINGLE STAGE CONTINUOUS TYPE BIOGAS PLANT
In such a plant Phase-I (acid formation) and Phase-II (methanation) are carried out in the same
chamber without barrier. Such plants are simple, economical, easy to operate and control. These plants
are generally preferred for small and medium size biogas plants. Single stage plants have lesser rate of
gas production than the two stage plant.