Sewing the skirt consists of 3 stages

The skirts stand at the waist. They are worn on a piece of suit or alox. Fats can be sewn from a variety of gauze: silk, wool, drape, leather, suede.

Sewing the skirt consists of 3 stages:
sewing the knock;
sewing the top edge;
sew the bottom edge.

The technological order of the processing of the skirt will depend on the model.

The following can be taken as a Tipovoy method:
- familiarize yourself with the clothing model, technical details or picture shown by the biker;
- check the integrity of the details, their conformity to the model or the picture shown by the biker, the direction of the thread in the gauze;
- vitoch, tachting, lizards, cuts, knocks and x.k. move the lines from the right detail to the left detail;
- preparation for the wardrobe;
- try on the skirt;
- placement of the skirt belt, cut and glare;
- shears, vitochka, tachting, embossing and x.k. processing, cutting, sewing with a pair of skirts;
- processing of skirt knob, top shear and skirt shear;
- continuous handling of the skirt.

"The "Molnia" ribbon can be connected to the main detail invisibly. The teeth of the worn molnia are attached to the reverse of the skirt with care so that the underwear does not wear. Beware of the main material, its width is 8-9 cm, the length is equal to the length of the knock. The view is turned inward, two bends long, and the top is sewn with an agdarma stitch. It then turns to the right and the two open-cut sides are cracked in a special 51-A cl machine. Ready to iron the watch. "Molnia" puts the ribbon on the reverse of the main detail and stares at the right of the main detail. Then, holding the main detail back, the wary for the back piece stitching is tied by attaching its shears to the back piece and attaching them to the stitching fee. The lower end of the strap is met by running a series of two return velvet reverse of the front

When sewing a skirt "molnia" ribbon with a tie, the skirt stitches are sewn and cracked, the strap is placed under the seam on the other side of the detail and 4-7 cm from the edge of the strap. maso-fada is referred to as a velvet. "The top-to-ceiling edges of the "Molnia" ribbon are 0.5 cm from the top edge of the skirt. tiki-ladi in the distance. At the end of the knock, the "molnia" is sewn with 5 rows of its last teeth. Stitched seamless stitching