Article Number 3091079 description


Download 61.69 Kb.
bet13/35
Sana13.02.2023
Hajmi61.69 Kb.
#1194006
1   ...   9   10   11   12   13   14   15   16   ...   35
Bog'liq
f 6235f1eeefc3df42

DELIVERY CONTENTS

  • Keyless chuck 1 - 16 mm

  • Morse cone MK 4-B16

  • Transmission oil

OPTIdrill DH 35G


With coolant and thread cutting device
Article Number
3034250

DESCRIPTION

  • Dirt and water resistant, easy to clean membrane keypad

  • Electronics 24V DC

  • Depth stop

  • Electrical quill feed

  • Low-maintenance, running in closed oil bath gearbox

  • Threading attachment

  • Machine light integrated in the drill head

  • Main switch

  • Large, height-adjustable protective screen with safety switch for the utmost protection of the user

  • Large dimensioned, solid drill table, precisely worked with diagonal T-slots and all-round cooling water channel, strongly ribbed on the back, tiltable ± 90 ° sideways

  • Coolant device integrated with coolant reservoir in the base plate

  • Chip filter cleans the coolant from coarse components

  • Extremely stable, thick-walled cast-iron column for high power consumption

  • Solid base plate with parallel T-slots, precision surface finish

  • Optional foot switch for switching between right-left rotation and thread cutting (article no. 3050032) available


DELIVERY CONTENTS

  • Keyless chuck 1 - 16 mm

  • Morse cone MK 4-B16


3 - Токарные станки
OPTIturn TX 4414
Meets highest requirements in technical equipment and precision. With digital NEWALL position indicator DP 700
Article Number
3432420

DESCRIPTION

  • Machine bed made of highly ribbed cast iron

  • One-piece machine base made of steel

  • High rigidity of the headstock housing due to highly ribbed 25GG cast iron

  • Precision machined slides

  • Shafts on needle bearings, All components are lubricated in an oil bath

  • Bed guides hardened and precision-ground

  • All electronic controls centrally accessible

  • All gears of the feed gear are made of steel, hardened and ground

  • Hand wheels decoupled and tested according to EN 23125

  • Double channel right-left switch tested according to EN 23125

  • Switch with life cycle calculation, tested according to EN ISO 13849

  • Coolant unit with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN

  • complete control system and feed spindle cover

  • Complete illumination of the working area

  • Service-friendly removable rear wall

  • Hardened and ground face spindle guarantees enormous accuracy and durability

  • Thanks to the high cutting performance, high chip removal during roughing machining is no problem

  • Energy chain for gentle cable management and hose guide

  • Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, manually movable

  • No change gears necessary

  • With safety device against simultaneous operation of threading and feed mechanism

  • Electronically braked motor

  • Electronically feed cut-off of Z-axis

  • Electric position switch-off with quadruple position stop

  • Three-jaw lathe chuck in standard scope of supply

  • Quick change steel holder SWH 5-B

  • Digital position display DP700



Download 61.69 Kb.

Do'stlaringiz bilan baham:
1   ...   9   10   11   12   13   14   15   16   ...   35




Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2024
ma'muriyatiga murojaat qiling