Article Number 3091079 description


Digital Position Display DP700


Download 61.69 Kb.
bet15/35
Sana13.02.2023
Hajmi61.69 Kb.
#1194006
1   ...   11   12   13   14   15   16   17   18   ...   35
Bog'liq
f 6235f1eeefc3df42

Digital Position Display DP700 (For more information see "NEWALL-DP700")

TX 5216

  • Large spindle bore Ø 80 mm


DELIVERY CONTENTS

  •  Three jaw chucks

  •  Reduction sleeve MK 7 / MK 5

  •  Fixed center point MK 5 long

  •  Fixed centering point MK 5 short

  •  Quick change steel holder SWH 7-C (TX 5216)

  •  Quick change steel holder SWH 7-C (TX 6222)

  •  Steel holder 25 x 120 type D for square chisels

  • operating tool

OPTIturn TX 5216V


With electronically adjustable drive and digital position indicator NEWALL DP 700
Article Number
3432445

DESCRIPTION
Arguments convincing in quality, performance and price


  • Machine bed made of heavily ribbed cast iron

  • One-piece machine base made of steel

  • High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron

  • Precisely crafted slide

  • Shafts on needle bearings, all components are lubricated in oil bath

  • Bed guides hardened and precision ground

  • All electronic controls can be reached centrally

  • All gear wheels of the feed gear made of steel, hardened and ground

  • Handwheels decoupled and tested according to EN 23125

  • Two-channel right-left switch tested according to EN 23125

  • Switch with life cycle calculation, tested according to EN ISO 13849

  • Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN

  • Complete master and traction spindle cover

  • Complete illumination of the work area

  • Service-friendly removable rear wall

  • Hardened and ground plane spindle ensures enormous accuracy and durability

  • Due to the great cutting performance, high chip removal is no problem during roughing

  • Energy chain for gentle cable and hose routing

  • Lockable chip protection moves with the bed sled with integrated position indicator and coolant hose, can be moved manually

  • No change gears necessary

  • With safety device against simultaneous operation of the threading and feed mechanism

  • Electronically retarded motor

  • Electronic feed cut-off of the Z-axis

  • Electrical position shutdown with fourfold position stop

  • Standard three-jaw lathe chuck

  • Quick-change steel holder SWH 7C

  • Steel holder 32 x 130 type D for square chisel 25 mm



Download 61.69 Kb.

Do'stlaringiz bilan baham:
1   ...   11   12   13   14   15   16   17   18   ...   35




Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2024
ma'muriyatiga murojaat qiling