station time line no. 67856.8
009
12.32.55
10
68645.5
008
12.32.30
10
68857.4
007
12.32.00
10
68682.9
006
12.32.54
10
68432.8
005
12.32.20
10
68845.7
004
12.31.59
10
68723.8
003
12.31.37
10
68245.6
002
12.31.02
10
68290.0
001
12.30.45
10
Console memory can be examined by pressing the
RECALL key. When you do this the
first half of the latest line in the memory stack will appear in the display. If the console
memory contained the values shown in Table 1 then the console display would show the
following:
RECALL'>67856.8 FIELD/TIME
009 STATION/DAY
If you press
RECALL again, the memory decrements, and the next reading will be
displayed:
68645.5 FIELD/TIME
008 STATION/DAY
Pressing
RECALL will continue to decrement the memory and each reading in the
sequence will be displayed. Pressing
ENTER while the display is still lit
will increment the
memory. In a large stack of data, it is not necessary to keep depressing
RECALL or
ENTER until the desired reading is found. In cases where you wish to look at a particular
reading (nn for example) you would press:
Geometrics, Inc
.
G-856AX Operation Manual
24
RECALL, SHIFT, ‘n’, ’n’, ENTER This key sequence will display the magnetic field measured in the
FIELD/TIME
display
and the station number
“nn”
in the
STATION/DAY
display
.
You can view the other half of the memory line (the time and line number) by pressing
the
TIME key while the first half of the memory line is being displayed. For the example
shown in Table 1, pressing
:
