3. Wash the bottles and the teats and all the equipment in cold
water.
4. Clean the hole in the teat with a pin.
5. Fill the sterilisation bucket with cold water then add the
sterilising liquid or tablets, then add the equipment to the bucket.
6. Stir
the equipment in the bucket, then put the lid on it and
close it.
7. Leave the equipment in the sterilised water for a while, then
take things out as you need them and let them dry.
Other methods of sterilizing bottles
There are numerous electrical appliances
on the market that
sterilize bottles, teats and so on using steam, microwave
technology and so on. These may save time and effort.
Preparing bottles
1.
Bring water to the boil
2. Pour the right amount of hot water into the bottle, following
the instructions on the formula container
3. Add the right amount of powder
for the amount of water in
the bottle, using the scoop supplied with the formula.
4. Put the lid on the bottle and shake it vigorously until the
powder dissolves completely.
5. Put the teat on the bottle without touching the part that will
go in the baby’s mouth, then leave it to cool to the right
temperature.
6. The bottle should be at body temperature
when giving it to the
baby (35-‐ 37°C).
Note
A new teat may restrict the flow of milk and be too slow for your
child. If that is the case you can widen the hole by using a
This eBook is solely for marwa_ghazi.b@hotmail.com personal use only.
eDarussalam does not permits to copy and distribute it to others.
PDF Watermark Remover DEMO : Purchase from www.PDFWatermarkRemover.com to remove the watermark
sterilized
pin or needle; insert the needle in the hole of the teat
to make it wider. If that does not solve the problem then you can
make more than one hole.
Do not force your baby to feed after he feels full, because his
appetite may differ from one meal to
another and if the mother
forces the baby to eat more food that may have the opposite
effect and may lead to loss of appetite.
Do'stlaringiz bilan baham: 
