Example Measurement & Verification Plan for a Super espc project

6.1 
Example M&V Plan 
4.4 Operations and Maintenance and Other Cost Savings 
O&M savings are not being claimed or documented for this ECM. 
4.5 Proposed Annual Savings for ECM 
Table 4-4: Proposed Annual Savings for ECM 2 – EMCS 
Electric 
energy use 
(kWh/yr) 
Electric 
demand* 
(kW-yr) 
Total 
energy 
use 
(MBtu/yr) 
Electric 
energy cost, 
Year 1 
($/yr) 
Electric 
demand 
cost, Year 
1 ($/yr) 
Other 
energy-
related 
O&M 
costs, 
Year 1 
($/yr) 
Total 
costs, 
Year 1 
($/yr) 
Baseline use 
1,266,002 
158 
4,321 
$66,465 
$15,291 
0 
$66,465 
Post-installation 
use 
811,894 
158 
2,771 
$42,624
$15,291
0 
$42,624
Savings 
454,108 0 1,550 
$23,841 
$0 
$0 
$23,841 
4.6 Post-Installation M&V Activities 
The points in the new EMCS system to be monitored for use in savings calculations are 
listed in Table 4-5. All of these points will be “trended” — meaning that there will be a 
time stamp associated with each recorded point value. From this information, the total 
operating hours of the affected equipment for the year will be calculated. Temperature 
data will be collected and analyzed to ensure that the operation of the control system is as 
intended. Additional points will be collected for ECM 3 (Chiller) so that this information 
can be used to verify the performance of that measure. A complete listing of the EMCS 
system parameters will be provided in the Post-Installation Report, including: 
• documentation of the actual EMCS installed, detailed sequences of operations, as-
built points list, and a summary of the EMCS operation features in regard to 
control of the chiller pump and fan motors, and 
• operation manuals for the EMCS and chillers. 
2/07
page 18 

---