Pulp and paper industry Pulp and Paper Manufacturing Process in the paper industry Conclusion. References

Papermaking Procedure
Bleached or unbleached pulp may be further refined to cut the fibers and roughen the surface of the fibers to enhance formation and bonding of the fibers as they enter the paper machine.
Water is added to the pulp slurry to make a thin mixture normally containing less than 1 percent fiber. The dilute slurry is then cleaned in cyclone cleaners and screened in centrifugal screens before being fed into the ‘wet end’ of the paper-forming machine. The dilute stock passes through a head-box that distributes the fiber slurry uniformly over the width of the paper sheet to be formed.


Conclusion.
Paper plays a key role in our daily life and papers have been used for many years from now. Papers are made with the pulp of the woods, which is an Eco-friendly product.
The pulp is fed to a paper machine where it is formed as a paper web and the water is removed from it by pressing and drying.
Pressing the sheet removes the water by force. Once the water is forced from the sheet, a special kind of felt, which is not to be confused with the traditional one, is used to collect the water. Whereas, when making paper by hand, a blotter sheet is used instead.
Drying involves using air or heat to remove water from the paper sheets. In the earliest days of paper making, this was done by hanging the sheets like laundry. In more modern times, various forms of heated drying mechanisms are used. On the paper machine, the most common is the steam heated can dryer.


References.

1. 
   Tsien, Tsuen-Hsuin (1985), Paper and Printing, Science and Civilisation in China: Chemistry and Chemical Technology, vol. 5 Part 1, Cambridge University Press, p. 58
   
2. 
   ^ Tsien, Tsuen-Hsuin (1985), Paper and Printing, Science and Civilisation in China: Chemistry and Chemical Technology, vol. 5 Part 1, Cambridge University Press, p. 48