РпЭ (uz-ru-en) Premium Classic

Attention! During installation and operation of the water heater it is FORBIDDEN
use previously used fittings and should only be used new plumbing wiring.
Installation of safety valve included in the delivery set is necessary. Do not install any 
stop valve between the safety valve and the inlet of the tank and do not block the drain 
hole of the safety valve. Demountable connectors should be used for the water heater 
connection to the water supply system.
R10310914
UZ/RU 06.2021

---

 
2 meter
Tank with water
 
 
Mixer
Body
«WH»
series
Thermometer
Power cord
Safety valve
Water inlet valve
Water inlet valve
Cold water pipe
Safety valve lever
Drainer
27
«TT WH»
series
Hot water pipe
Fig. 1 Water heater installation and connection scheme
Fig. 1 Connection scheme to open tank filled with water
6.3. Electrical connection
Attention! Electrical wiring should be done by a qualified technician, ensuring it complies 
with safety rules. The manufacturer is not to be held responsible for any damage caused by 
the incorrect earthing of the system or for fault defaults of the electricity supply.
6.3.1. The water heater is supplied with a power supply cable. Connect the appliance to power 
source.
6.3.2. The water heater must be earthed. Grounding scheme should ensure the absence of electric 
potential on the body of the water heater. The earth cable (of yellow-green color) should be fixed to 
the terminal marked by the symbol . Fix the power supply cable using the cable clamps.
6.3.3. Make sure that the power supply voltage conforms to the water heater technical characteristics 
indicated on the data label.