Xiamen yitai industrial co., Ltd

XIAMEN YITAI INDUSTRIAL CO., LTD
ADD:ROOM 19A,HAIBIN BUILDING LUJIANG ROAD,SIMING DISTRICT,XIAMEN,CHINA TEL:[phone]

YTW-ST SEMI-TIPPING MACHINE

Manual

YTW-ST Semi-automatic tipping machine is my factory developed machine in 1985, it has a reasonable structure, light weight, small size, low power consumption, easy operation, easy maintenance, low price, economical and durable, etc., It is widely used in shoes industry and the gift industry. The machine sold throughout the country, welcomed by the majority of users, in order to facilitate maintenance, service, give full play to the machine performance, to extend the life of the machine, here describe the following special instructions:

One, Main structure and scope
The main structures by the machine bracket, transmission parts, sheet feeding device, die cutter, infusion mechanism and electrical parts and other components.
Scope of this machine is a variety of chemical fiber shoelaces and special shoelaces ,elastic band can also be used, output up to 6000 to 6500 pcs per day.
Two, Main characters and parameters
This machine is energy saving, consumption per ten thousand industrial needs acetone is around 0.8kg, shoelace length is no limited.
Outer dimension: L800mm H990mm W650mm(photo 1)
Weight: 160kg
Power: 220v
Electronic tube power: 250w electronic tube size: Φ12x8cm
Machine power: 0.75kw /380v/3phase
Industrial adhesives acetone:CH3 COCH3
Films can be used: thickness0.20～0.25mm width25 30 32 36 40 50mm
Cutter size:φ2.1、2.3、2.5、2.8、3.0、3.2、3.5、3.7、4.0、4.2mm
Three, Operation method,
Before power input, put lubrication oil on relative parts, switch the working indicator light, it is opened if the light is on. After around 15 minutes, the cutter mold is 50 ~ 60 ℃, injet the acetone, discharge pump air until the acetone can go out. Then it is ok to start the motor, and then put the shoelace in the middle of the cutter, clutch pedal, and then release the pedal. The head is tipped when the shaft turns 360 degree.