1. Delete the gel picture on the third slide


Download 447 b.
Sana05.08.2017
Hajmi447 b.


1. Delete the gel picture on the third slide.

  • 1. Delete the gel picture on the third slide.

  • 2. Paste your gel picture on the third slide, crop to get your side of the gel, & resize so that the picture is about the size of the example on the third slide. The picture must be in black and white.

  • 3. Re-align the standard lines on the left. Remember the biggest gap is between 1000 and 1650. You may need to re-adjust the lanes as well.

  • 4. Replace the “#” in the top left with the proper clone round. Label the lanes with the proper clone name initials

  • 5. Indicate the calculated size of the insert at the bottom of the gel (i.e. change ### to 500 bp). Note: remember to subtract the vector length of 700 bp from where the unknowns in the “D” lane match up to the standard. Also put the calculated sizes from the PCR gels.


***If you cannot determine the size of your insert, put either contam (if the prep is contaminated) or N/A (if there are other problems). Make sure to explain why you can’t determine the size in a comment on the Clone Report Sheet. Refer to the RDG Mockup Recap on the website if you are having trouble determining the problem***

  • ***If you cannot determine the size of your insert, put either contam (if the prep is contaminated) or N/A (if there are other problems). Make sure to explain why you can’t determine the size in a comment on the Clone Report Sheet. Refer to the RDG Mockup Recap on the website if you are having trouble determining the problem***

  • 6. Complete all other fields like student names, date, and lab group #.

  • 7. Save file as a .jpeg. Upload to your personal Google drive account and name the file with the proper PCRG name (i.e. 04RDG1.14 Group 0).

  • 8. Change the privacy settings of the file to “Anyone with the link can access” and paste the link on the Clone Report Sheet. Fill out approximated insert sizes on the Clone Report Sheet. If you cannot determine the size, explain why in a comment (right clickinsert comment).



  • 9. Go to the Clone Report Sheet. Put either YES or NO in the “Sequence Clone” column. Refer to the RDG Mockup Recap to find out if you should put yes or no. If you put NO, or you feel the need to justify your YES, you need to explain why in a comment. (insert  comment).

  • DO NOT HIGHLIGHT ANYTHING IN BLUE!!!!!!!!!!!!!!!!!!!!!!






Do'stlaringiz bilan baham:


Ma'lumotlar bazasi mualliflik huquqi bilan himoyalangan ©fayllar.org 2017
ma'muriyatiga murojaat qiling