- Easier processor motherboards occupy placed before casing. How to install the processor socket and slot types differ.
Assembling OWN COMPUTER - Determine the position of pin 1 on the processor and the processor socket on the motherboard, usually located on the corner marked with a dot, triangle or curve.
- Straighten locking lever position to open the socket.
- Insert the processor into the socket by aligning the position of first legs with holes processor socket. Squeeze until there is no gap between the processor with the socket.
- Lower the locking lever back.
Assembling OWN COMPUTER - Slot Type
- Install buffer (bracket) at the two ends of a slot on the motherboard so that the peg hole position met with a hole in the motherboard
- Enter the pegs and locking pin in the hole peg
- Processor card tucked in between the brace and press to the right into the hole slot.
Assembling OWN COMPUTER - TYPES OF SLOT IN assembling a PC that is:
Assembling OWN COMPUTER - 3. Install Heatsink
- Heatsinks function is to remove the heat generated by the processor through the conduction of heat from the processor to the heatsink.
- To optimize the heat transfer of the heatsink must be fitted tightly on the top of the processor with a few clips as a drag while the contacts on the heatsink surface coated with the gene of heat.
- If the heatsink is equipped with a fan on the fan power connector is connected to the fan connector on the motherboard.
Assembling OWN COMPUTER Assembling OWN COMPUTER - 4. Installing Memory Modules
- Memory modules are installed sequentially from the smallest socket number. The order of installation can be seen from the diagram of the motherboard.
- Each type of memory modules SIMMs, DIMM and RIMM can be distinguished by the position of grooves on the sides and bottom of the module.
Do'stlaringiz bilan baham: |
