Assembling OWN COMPUTER - 10. Settlement End
- Replace the chassis cover by sliding
- connect the cable from the power supply into the wall socket.
- Connect the monitor to the video card port.
- Connect the phone cable into the modem port if there is
Assembling OWN COMPUTER - Connect the keyboard cable connector and plug the mouse into the mouse port or serial poert (depending on the type of mouse).
- Connect other external devices such as speakers, joystick, and microphone if there is to the appropriate port. Check the manual of the adapter cards to ensure the port location.
Assembling OWN COMPUTER Assembling OWN COMPUTER - Testing
- The new computer is assembled can be tested by running the BIOS setup program. How to do a test with the BIOS programs are as follows:
- Turn on the monitor and the system unit. Note the display monitor and the sound from the speakers.
Assembling OWN COMPUTER - Fost of the BIOS program will automatically detect the installed computer hardware. If there are errors then display a blank screen and the speaker sounds a beep on a regular basis as an indication of error codes. Check reference BIOS code to find an error indication is meant by the beep code.
Assembling OWN COMPUTER - If no error occurs then the monitor displays the execution of the POST program. BIOS interrupt key ekan according to the instructions on the screen to enter the BIOS setup program.
- Check all the hardware detection by the BIOS setup program. Some settings may have changed in value, especially the capacity of hard drives and boot sequence.
- Save changes to the settings and exit the BIOS setup.
Do'stlaringiz bilan baham: |
