Installation Manual indd

Antenna Module (CN7)
Mount the antenna horizontally at the top left or right corner of the front windshield.
The transmitting distance may decrease if the vehicle has a UV protective coating 
on the windshield.
➢

Start Button (CN8)
1. Push button ON/OFF


1-1) Engine ON
To start your vehicle, press the 
brake and press the Push-to-Start 
button. The “STOP” will illuminate 
to red.
O n c e t h e p a r k i n g b r a k e 
(automatic transmission) or the 
emergency brake (manual 
transmission) is released, the
red illumination will disappear. Once the red "STOP" illumination disappears, 
you will not be able to stop the engine.
1-2) Engine OFF
To turn your engine off, press the brake and press the Push-to-Start button.
Once the parking brake (automatic transmission) or the emergency brake 
(manual transmission) is engaged, the green illumination will appear on 
“START”.
2. OFF  ACC  ON  OFF


2-1) ACC
To enable the vehicle in the ACC mode, 
press the Push-to-Start button once 
without pressing on the brake
2-2) ON
To enable the vehicle in the Ignition ON 
mode, press the Push-to-Start button 
twice without pressing on the brake.

---

14
INSTALLATION GUIDE
15
INSTALLATION GUIDE
U S A
U S A
➢

Auxiliary Harness (CN9)
 CN9/1
YELLOW 
(-250mA) AUX 1 OUTPUT
This wire provides (-) 250mA programmable output whenever the transmitter 
button(s) controlling Aux 1 is pressed. 
• For two switch vehicles: Please connect it with folding Switch wire as below
 CN9/2
YELLOW/BLACK 
(-250mA) AUX 2 OUTPUT
This wire provides (-) 250mA programmable output whenever the transmitter 
button(s) controlling Aux 2 is pressed.