Project Management in the Oil and Gas Industry

Table 7.1 Design QC in ISO 9000.
Design Input
Output Design 
• Instructions and control operations.
• Taking into account the marketing materials
• Specifications and tolerances allowed
• Health and Safety and Environment Computer
• Design review
• Design review process
• Verification of the design

---

240 
Project Management in the Oil and Gas Industry
features, and safety and health overlap between the technical teams to 
change the design analysis of landslides in the internal audit. 
The input design is all the technical information necessary for the design 
process, as it is clear that the foundation that is the information from the 
owner and SOR must be identified and developed to verify the accuracy 
of input design to ensure that the output of the process design is identical 
with the design required. Any information that is not clear or skeptical 
must be resolved at that stage.
Instructions to control operations are often stipulated in the contract 
where the client puts some instructions to control the whole process or 
request some specific actions. 
Marketing is an important factor in the design process and must be 
compatible with the design and marketing research commensurate with 
the demands of the market. Therefore, we must make sure that the market-
ing team has entered at that stage.
The designer must take into account the available materials in the mar-
ket and the abilities of the owner.
Specifications and tolerances must be identical with the design spec-
ifications of the project and the tolerances must be compatible with the 
specifications and requirements of the owner. 
The designer must take the standards of health, safety, and the environ-
ment into consideration in design for the work at the site during the design 
phase. 
Modification and renewal by the drawings have become easy with 
(CAD) Computer Aided Design in order to obtain more accurate informa-
tion and access to information through various forms of tables and graphs. 
Output design, a pre-final in the design process, must be a design compat-
ible with all design requirements through internal audit. A change or modi-
fication in the design should not be compared with the old design because 
the design must be compatible with the specifications of safety and health. 
Design review must be set in the early stages of design. Make sure that 
the design is done according to the constraints of the timetable and costs.
Verification of the design, in this case, is reviewed in design calcula-
tions for accuracy and is also done periodically, taking into account pre-
vious similar designs that can be created as a model for the design and 
operation test.