Rail transport in the Soviet Union

Rail transport in the
Soviet Union
Plan
1 Rail traffic in Soviet Union
2 Railway labor
3 Railway colleges
4 conclusion

The Soviet Union was heavily dependent on rail transport, not least during the Russian Civil War and World War II, but also for industrialization according to the five-year plans.

aa
Post stamp "Soviet rail roads", 1968

During the Soviet era, freight rail traffic increased 55 times (over that of theRussian empire just before World War I), passenger traffic increased by almost 10 times due to the exporting of people to gulags and other personal managing facilities, the length of the rail network almost doubled in size in this time as well.^[1] The Soviet Union had a railway network of 147,400 kilometres (91,600 mi) (excluding industrial railways), of which 53,900 kilometres (33,500 mi) were electrified.^[2]aw

Russian locomotive class U - U-127 Lenin's 4-6-0 oil burning compound locomotive, currently preserved at the Museum of the Moscow Railway at Paveletsky Rail Terminal

VL80^T Electric locomotive hauling freight train
After the foundation of the Soviet Union thePeople's Commissariat of Railways (NKPS) (after 1946 renamed theMinistry of Railways (МПС)), the railway network expanded to a total length of 106,100 km by 1940 (vs. 81,000 km in 1917 which was exceeded in length only by the United States).^[3] The volume of freight hauled (in tonne-km) increased over fourfold during this period.^[4] Railways and control of railways had been a major factor in the Russian Civil War and the Red Army's eventual victory in the conflict.^[5] A notable project of the late 1920s, which became one of the centrepieces of thefirst five-year plan, was the Turkestan- Siberia Railway, linking Western Siberiavia Eastern Kazawkhstan withUzbekistan.
In the late 1920s, the young Soviet Union underStalin embarked on a programme of rapid industrialization. In a 1931 speech, in which Stalin promoted intensive industrialization, he concluded that "We are fifty or a hundred years behind the advanced countries. We must make good this distance in ten years. Either we do it, or we shall be crushed."^[6] But if industrialization generally was to be given first priority, the question arose as to what priority should be given to railway development specifically, keeping in mind that industrialization requires greatly increased rail transportation of goods, e.g. iron ore and coal for steel mills. An example of this was the "Ural-Kuznetsk metallurgical combine" (approved in 1928) where the source of coal was located over 2000 km from the source of iron ore.^[7] Not only that, but the steel output had to be transported long distances to its final point of use.
A British railway historian^[8] claims that the Soviet objective was to limit investment in railway improvements so that railways could barely meet the new and heavy demands for increased transport placed on them by industrialization, thereby allowing more capital for such industrialization. While there were significant investments made in railways, they were not enough to avoid the failure at times to transport all the goods, especially in early 1931 and 1933. Some of the resulting supply-line crises resulted in production shut-downs.^[9] However, in other cases "crisis" was used to describe a situation where the stocks of inputs stored at a plant (such as iron ore at a steel mill) almost ran out due to the railway's failure to deliver on time; no substantial harm would be done to production output, but it would be a close call.
Near the start of first five-year plan of industrialization (1928) there were four main railway decision makers: the government, the party,Gosplan (the Soviet central planning agency), and the railway ministry (known as NKPS).^[10] When the NKPS didn't seem to be able to cope with a situation, the party or government would intervene.^[11] The majority agreed on increasing investments, but there was no clear consensus on how these investments were to be used.Gosplan advocated the rationalization of the railways, coupled with tariffs based on actual cost, which would reduce traffic demand and provide funds for investment. In 1931, in a Central Committee (CC) resolution proposed recapitalization^[12] (replacing all the ties, rails, and renewing the ballast by either cleaning or new ballast) to create some "super mainlines" which would be electrified. This resolution was never adequately carried out, and the actual electrification achieved was only about a tenth of that proposed.
The Central Committee sent Lazar Kaganovich to solve the railway crisis in 1935. Kaganovich first prioritized bottleneck areas over other less-traveled lines; his second priority was investing in heavy traffic lines, and thirdly, other lines (which were also burdened with increases traffic) were left to fend for themselves.^[13] Another problem facing rail transport was themassive industrialization efforts pushed on by the authorities. This industrialization placed a heavy burden upon the railways, and Vyacheslav Molotov and Kaganovich even admitted this to the18th party congress. Even so, theSoviet Government continued their industrialization efforts to better prepare themselves for a future war with Germany, which became reality in 1941.^[14]
Modal shares in 1940; rail dominates
At the end of the pre-war period^[15] in 1940, railroads held an 85% share of freight transport (tonne-km) and a 92% share of intercity passenger transport (passenger-km). For non-rail transport it was: Freight (in tonne-km): river 7%, sea^[16] 5%, truck 2%, pipeline under 1%. For passengers: Bus 3.5%, river 3%, sea^[17] 1%, air 0.2%. So rail was by far the dominant mode of transportation for both passengers and freight. In the United States in 1940, rail still dominated freight with a 61% share, but only had a 7.5% share of passenger travel, having lost most of this traffic to the automobile.^[18]
Rail traffic in Soviet Union
Rail freight traffic in the Soviet Union

Railway freight volume in the 20th century: USA and USSR

The graph compares the freight traffic (in tonne-km) of the USSR to the US.^[19] The USSR rebuilt its rail system and industrialized with five-year plans. As a result, railway freight grew about 20 times from 20 to 400 billion tonne-km by 1941.^[20] But then disaster struck again, World War II began. In the first year or so of the war, traffic plummeted to about half its prewar value. But then the USSR started restoring and constructing railways during wartime so that by the end of the war about half of the lost traffic had been recovered. After the war was over it took a few more years to restore the railways and get back to the pre-war level of traffic.

Then the USSR embarked on a series of more five-year plans, and railway traffic rapidly increased. By 1954 their rail freight traffic (about 850 billion tonne-km) surpassed that of the United States and the USSR then hauled more rail freight than any other country in the world.^[21] Railway freight continued to rapidly increase in the USSR so that by 1960 the USSR was hauling about half of all railway freight in the world (in tonne-km)^[22] and they did this on a rail system consisting of 10% of the world's railway kilometrage.^[23] The status of hauling half the world's railway freight continued for almost thirty years, but in 1988 railway freight traffic peaked at 3852 billion tonne-km (nearly 4 trillion). This rapid growth may seem impressive, but it was also in some senses a failure, since railway traffic at times did not grow fast enough to satisfy demand, partly due to congestion.
In 1991 the Soviet Union fell apart and its largest republic, the Russian Federation, which then hauled about 2/3 of the traffic of the former USSR, became an independent country.^[24] For the USSR in 1989, shortly before the collapse of Soviet Union, the railway hauled nearly eight times as much tonne-km of freight by rail as they did by lorry.^[25] In 1991 a law was passed which declared that railways were the basic transport system of the USSR.^[26]
While highways were more popular in the United States rather than railways, in contrast the Soviet Union had little or no highway system to speak of.^[27]
Rail passenger traffic in the Soviet Union

Railway passenger volume: USA and USSR

This plot compares the volume of rail passenger transportation in theSoviet Union and the United States (United States).^[28] Since the Soviet Union was created in late 1922, the curve prior to this is the estimated volume of passenger transport in the "pre-Soviet territory" defined as being within the borders of the Soviet Union of the late 1930s (before the annexations per the secret protocol of theMolotov-Ribbentrop Pact).^[29]

In the early years of the 20th century rail dominated passenger transport so the start of this graph implies that there was about twice as much passenger transport in the United States as in the pre-SovietRussian Empire. But in the early 1920s in theUS, the automobile started to provide more passenger transportation than rail.^[30] In the US, auto's share rapidly increased so that by the early 1960s auto travel was over 100 times rail passenger travel.^[31] Thus one may mentally multiply the US rail curve after the early 1960s by a factor of over 100 to get the total passenger-km in the US. Although Soviet passenger travel by rail became several times that of the US, the total passenger travel in the US was many times larger than for the Soviet Union.
After about 1960, most of the USA rail travel shown in the USA-USSR graph is commuter train travel of (mostly) people going to and from work and not long-distance travel (Amtrak).^[32] While air travel in the USA overtook rail travel in the mid 1950s, in the Soviet Union of the late 1980s, rail volume was double that of air travel.^[33]
World War II hit both the USA and the USSR in 1941 with opposite results for rail passengers. In the US, gasoline rationing resulted in a surge of rail passengers with almost a third of passenger traffic going by rail.^[34] The impact on the USSR was just the opposite. The invasion of Germany deep into the USSR along with German bombing of railroads, took its toll and greatly reduced passenger rail travel.
It was planned in 1990 to increase the passenger-kilometers of travel to 465 billion by 1995 and to 500 billion by 2000, but it didn't happen since the USSR collapsed in 1991.^[35]
World War II
During World War II the railway system played a vital role in the war effort transporting military personnel, equipment and freight to the front lines and often evacuating entire factories and towns from European Russia to theUral region andSiberia. The loss of mining and industrial centers of the western Soviet Union necessitated speedy construction of new railways during the wartime. Particularly notable among them was the railway to the Arctic coal mines of Vorkuta, extended after the war toLabytnangi on theOb River; construction work to extend itall the way to the Yenisey continued into the 1950s, aborted with the death of Joseph Stalin.


Japanese D51 steam locomotive outside the Yuzhno-Sakhalinsk Railway StationSakhalin Island, Russia (2007)
As a result of Japan's loss in World War II, the southern half ofSakhalin Island was annexed bySoviet Union in 1945. The 1,067 mm (3 ft 6 in) railway network built by the Japanese during their forty years of control ofsouthern Sakhalin now became part of Soviet Railways as well (as a separateSakhalin Railway), the only 3 ft 6 in (1,067 mm) gauge rail system within USSR (or today's Russia). The original Japanese D51 steam locomotives were used by the Soviet Railways on Sakhalin Island until 1979, together with regauged ShA USATC S160 Class locomotives.
Post-war development

After the war the Soviet railway network was re-built and further expanded to more than 145,000 km of track by major additions such asBaikal Amur Mainline.

Soviet rail transport eventually became, after World War II, the most heavily used rail system in the world, surpassing all of its First World counterparts}. However the rail network of the United States was a few times longer but had less traffic.
The Soviet railway system was growing in size, at a rate of 639 km a year from 1965 to 1980. This steady growth in rail transport can be explained by the country's need to extract its natural resources, most of which were located close to, or in Siberia. While some problems with the railways had been reported by the Soviet press, the Soviet Union could boast of controlling one of the most electrified railway systems at the time. During much of the country's later lifespan, trains usually carriedcoal, oil, construction material (mostly stone, cement and sand) and timber. Oil and oil products were one of the key reasons for building railway infrastructure in Siberia in the first place.^[36]
The efficiency of the railways improved over time, and by the 1980s Soviet railways had become the most intensively used in the world. Most Soviet citizens did not own private transport, and if they did, it was difficult to drive long distances due to the poor conditions of many roads. Another explanation has to do with Soviet policy, the first being theautarkic model created by Joseph Stalin's regime. Stalin's regime instead of building major new railway lines decided instead to conserve, and later expand, much of the existing railways left behind by the Tsars.^[37] However, as Lev Voronin, aFirst Deputy Premier of the Soviet Union, noted in a speech to the Supreme Soviet of the Soviet Union in 1989 that the railway sector was the "main negative sector of the economy in 1989". As industrial output declined in the late-1980s so did the demand for transportation.^[38]
USSR vs. USA: Were the Soviets More Efficient?
The efficiency of the Soviet Railways improved over time and by the 1980s had many performance indicators superior to the United States.^[39] Railway built in the USSR were planned, and in contrast to the US, only a single railway line would be constructed between major cities. This avoided the situation in the US where two (or sometimes more) railway companies would construct lines that more or less paralleled each other resulting in wasteful duplication of effort.^[40] Many of the rail lines in the USSR were inherited from the Russian Empire which had also avoided such duplication.
As a result of having a shorter rail system plus more freight traffic, the USSR had a freight traffic density (in ton-km per km of line) 6-7 times higher than the US.^[41] In the US, the mean daily freight car mileage was only 95 km. vs. 227 km. for the USSR.^[41] For freight locomotives it was 360 km. vs. 425 km. The percent of freight car miles that ran empty was 41% for the US vs. 29% for the USSR. It was claimed that labor productivity rose 4.3 fold between 1955 and 1980, resulting in the USSR being roughly the same as the US (after taking into account that the USSR hauled a greater proportion of non-bulk commodities which were more labor­intensive to haul—more switching of cars, etc.).^[41]
The Soviet Union made the transition to automatic brakes and couplers (model SA3) long after the United States did and as a result their brakes and couplers^[42] were somewhat more advanced. Their (air) brakes could operate in a mode where it was possible to slowly reduce braking effort, while the US system required full release of the brakes (in the entire train) and reapplication of the brakes in order to reduce braking effort.^[43] The Soviet Union developed advanced machinery for track maintenance and renewal such as a Continuous Action Tamping Machine which in 1977 could move at 3 km/hr and also straighten the track and dress theballast.^[44] It was model ВПО-3000 (VPO-3000) and at that time no such machinery like this existed outside of the Soviet Union. It was claimed to be several times faster than non-Soviet tamping machinery of cyclical action.
However, the reliability of locomotives in the USSR was much worse than for the US.^[45] Their high traffic density often resulted in traffic congestion and delays, especially after an accident blocked the line.^[45][46]
Congestion and failure to transport
Harm to the Soviet Economy The railway system in the Soviet Union (mostly after the 1920s) was utilized several times more intensively than the railways of developed capitalist countries.^[47] The high traffic volumes per kilometer of line resulted in congestion problems that at times became so severe that goods available for transport could not be shipped and factories, etc. were forced to slow production. This happened in the 1930s^[48] and during the so-called Brezhnev stagnation starting in the late 1970s and beyond. In 1989 the President of the Council of Ministers of the USSR stated^[49] that economists estimate that the failure of railways to provide adequate transportation, costs the Soviet economy 10-12 billion roubles per year.
Train flow basics
The flow on a transportation route (in tons/hour, trains/day, etc.) is simply equal to the product of velocity and linear density (gross tons/meter or trains/km etc.).^[50] For a railway line as a whole (in one direction), one would use the average linear density along the whole line, where most points on the line have no trains on them and thus have zero density there. One would also need to use the average velocity which turns out to be the weighted harmonic mean where the weights are the lengths of the various segments of the train run (with the speed approximately constant on each segment). Another way to find the average velocity is to simply find the weighted arithmetic mean where the weights is this case are the times on each segment. For a segment of a train run where the speed is very slow, the train thus spends a long time traversing this segment and thus the weight for this segment is quite high (since it is weighted by time). Thus even though the slow speed segments are only a small part of the trip, they may drastically reduce the average speed (and thus the flow).
So there are two basic ways to increase flow: 1. increase the speed 2. increase the density. One way to significantly increase speed on a high traffic line is to reduce the number of times a train must stop (or slow) to allow other trains to pass, especially on a single track line where opposing trains must go past each other. To increase density, one may increase train length, increase the linear load capacity of freight cars, and/or decrease the spacing between trains.
But theAutomatic block signalling system tends to maintain a minimum distance between trains (moving under the green signal aspect).^[51] Trains may follow each other more closely if they move into the amber (or yellow) signal aspect but then they must move at a slower speed. On single track lines between passing sidings, trains can't travel in opposite directions at the same time. If they tried to do this, they would collide head on with each other (if they were headed toward each other). This poses a further restriction in train spacing.
Ways to increase capacity There are various ways to permit rail freight flow capacity to increase, thus reducing congestion. But they are easier said than done. One is to increase the average density of freight on a rail line by increasing train weight/length. Another way is to decrease the distance (spacing) between successive trains. Still another way is to increase speed, including elimination of trains stopping.
Increasing freight flow by increasing density
One expedient is to reduce the spacing between 2 or 3 trains to zero by running "connected" trains.^[52] One simply couples two or more trains together without connecting the braking systems of the 2 trains. The locomotive crews then coordinate their handing of the train by radio possibly using a special device to synchronize braking.^[53] If they don't coordinate properly, the combined train can derail due to high forces in the train. This method was used in the Soviet Union mostly as a temporary expedient^[54](especially in cases where a length of track was temporarily closed for maintenance work). But on theBratsk division of theBAM railroad, it was used as a standard method of operation in the 1970s.^[53]
In the mid-1980s about 70% of the Soviet network was single track lines.^[55] It was proposed to select two large end stations on a single track line that have enough trackage to hold several trains. Then opposing trains accumulate at such stations and the trains that accumulated at one end station then proceed down the rail line closely spaced (a packet of trains) while traffic in the opposite opposing direction is spread out and yields (by pausing in the passing sidings) so that the packet of trains can travel non-stop over a significant distance. Later on, a non-stop packet can be formed in the other direction, etc. Using packets to increase capacity was common in the USSR.
Railway labor
Amenities for rail workers
Especially in the 1970s, some railway depots/shops began to provide a much improved working environment and whole books were written on this subject,^[56] sometimes called "production esthetics" (производственная эстетика).^[57] An example was at the mechanized track maintenance station ПМС-121 (PMS-121) (in 2013 ЦМПР) nearKyiv in the Ukraine. For the workers they installed showers, a shoe repair shop, a barber shop, a laundry, a small shop, a social club with a capacity for 200 people, a lounge, and an art studio.^[58] In the track assembly plant (they prefabricated lengths of track, with rails attached to sleepers/ties) they installed facilities for heating (and eating) food, a reading room and a billiard room. They also provided improved amenities when workers traveled to work on remote sections of track and lived in sleeping cars. As a result of the improved amenities, it is claimed that employee turnover was reduced from 63% (per year) to 11%.
Production esthetics included planting of greenery,^[59] providing proper lighting and pleasant colors,^[60] background music, sports area.^[61]