CN1/6
RED
(+) MAIN POWER 1
Connect to constant (+) 12V source, minimum 30A capacity.
Before Beginning the Installation
• Please read this entire installation guide before beginning the installation.
The installation of this push button remote start system requires interfacing with
many of the vehicle’s systems. Many new vehicles use low-voltage or multiplexed
systems that can be damaged by low resistance testing devices, such as test lights
and logic probes (computer safe test lights). Test all circuits with a high quality digital
multi-meter before making connections.
• Do not disconnect the battery if the vehicle has an anti-theft-coded radio.
If equipped with an air bag, avoid disconnecting the battery if possible. Many airbag
systems display a diagnostic code through their warning lights after they lose power.
Disconnecting the battery requires this code to be erased, which can require a trip to
the dealer.
• Roll down a window to avoid being locked out of the car.
6
INSTALLATION GUIDE
7
INSTALLATION GUIDE
U S A
U S A
➢
Door Lock Harness, 6-pin Connector (CN2)
CN2/1
BLACK (-)
GROUND
CN2/
6 PIN PLUG
AFTER MARKET DOOR LOCK SYSTEM
CN2/
3 PIN PLUG
OEM DOOR LOCK SYSTEM
➢
Primary Harness (CN3)
CN3/1
YELLOW
DOOR UNLOCK OUTPUT
CN3/2
GREEN
DOOR LOCK OUTPUT
Negative Door Lock System
Positive Door Lock System
Reverse Polarity System
Vacuum Door Lock System
Installation Essentiality Matters
Door Connection (CN2)
For the Vehicle
with OEM
Power Door Lock System
For the Vehicle
with After Market
Power Door Lock System
Do'stlaringiz bilan baham: |
